The VUC types of on-load tap changers come in a range of models with ratings suitable for most applications. They are mounted inside of the transformer tank, suspended from the transformer cover. The VUC types operate with arc quenching in vacuum interrupters.
The VUC types complete the UC family of tap changers, with their excellent service record since the 1960’s.
The VUCG is the smaller of the VUC types and is suitable for transformers up to 800 MVA with a BIL rating of 1050 kV and current rating of 1800 A.
On-load tap changers type VUCG
Product scope
- Base technology: Vacuum, resistance, in-tank, diverter switch
- Common applications: Network, special, industrial, HVDC
Tap-changer placed in the neutral point of the winding | Other placements of the tap-changer | |
---|---|---|
Highest voltage for equipment (Um) | 300 kV | 300 kV |
Max lightning impulse (BIL) | 1050 kV | 1050 kV |
Max current 3-phase 1-phase (one tap-changer/phase) |
800 A 1800 A |
N.A. 1800 A |
Enforced current splitting 1-phase (one tap-changer/phase) |
N.A. | N.A. |
Max step voltage | 3500 V | 3500 V |
Why Hitachi Energy?
- Plug-and-play interchangeability with traditional type UCG only requires diverter switch replacement
- Redundant switching capacity in the auxiliary contact system
- Maintenance in any tap position and without dismantling the shaft system, thus eliminating the risk for failure from improper assembly or alignment
- Possible to use alternative insulating fluids
Get to know more
Document title | ID |
---|---|
Technical guide | 1ZSC000562-AAX |
Declaration of conformity | 1ZSC000498-ABN |
Ordering data form (.xlsm format) Please note that this is an interactive form, which can be filled in, saved and sent to us by e-mail. |
1ZSC000498-ACC |
Ordering data form explanations | 1ZSC000498-AAP |
Installation and commissioning guide | 1ZSC000562-AAY |
User's guide | 1ZSC000562-ABE |
Accessories and protection devices | 1ZSC000562-AAD |
Oil filter unit, type HPS 27/27, 54 | 1ZSC000562-AAF |
Oil filter unit, type OLU | 1ZSC000562-AAR |
Insulating level (kV) | Selector | Switching type | Connection | Max. rated through-current (A) | Number of positions | Available versions | Drawing number |
380 650 750 1050 |
C | L | N | 450-600 | 5-18 | - | 1ZSC004882-ABH |
E, T, B11) | - | 1ZSC004882-AAU | |||||
E, T | 700-1200 | - | 1ZSC004882-AAV | ||||
>1200-1500 | - | 1ZSC004882-ABF | |||||
B21) | 450-600 | - | 1ZSC004882-AAY | ||||
R | N | 450-600 | 8-15 | - | 1ZSC004882-AAZ | ||
16-35 | - | 1ZSC004882-ABA | |||||
E, T, B11) | 8-15 | - | 1ZSC004882-ABB | ||||
16-35 | - | 1ZSC004882-ABC | |||||
E, T | 700-1200 | 8-15 | - | 1ZSC004882-ABD | |||
16-35 | - | 1ZSC004882-ABE | |||||
>1200-1500 | 8-15 | - | 1ZSC004882-ABG | ||||
16-35 | - | 1ZSC004882-ABL | |||||
B21) | 450-600 | 8-15 | - | 1ZSC004882-AAT | |||
16-35 | - | 1ZSC004882-AAH | |||||
D | N | 450-600 | 8-15 | - | 1ZSC004882-AAB | ||
16-35 | - | 1ZSC004882-AAC | |||||
E, T, B11) | 8-15 | - | 1ZSC004882-AAD | ||||
16-35 | - | 1ZSC004882-AAE | |||||
E, T | 700-1200 | 8-15 | - | 1ZSC004882-AAF | |||
16-35 | - | 1ZSC004882-AAG | |||||
>1200-1500 | 8-15 | - | 1ZSC004882-ABJ | ||||
16-35 | - | 1ZSC004882-ABK | |||||
B21) | 450-600 | 8-15 | - | 1ZSC004882-AAM | |||
16-35 | - | 1ZSC004882-AAN | |||||
1) B1 (1 phase) and B2 (2 phases) are combined components, forming the "B-group". |
Insulating level (kV) | Selector | Switching type | Connection | Max. rated through-current (A) | Number of positions | Available versions | Drawing number |
380 650 750 1050 |
III | L | N | 450-800 | 5-22 | 700 A: long 800 A: long For N. and B. |
1ZSC004912-AAA |
E, T, B11) | 1ZSC004912-AAB | ||||||
B21) | 1ZSC004912-AAF | ||||||
E, T | >800-1000 | 1ZSC004912-AAV | |||||
>1000-1800 | 1ZSC004912-AAX | ||||||
R, D | N | 450-800 | 9, 13 | 1ZSC004912-AAG | |||
11, 15-19, 21-23, 25-27, 29-31, 33-35 | 1ZSC004912-AAH | ||||||
E, T, B11) | 9, 13 | 1ZSC004912-AAJ | |||||
11, 15-19, 21-23, 25-27, 29-31, 33-35 | 1ZSC004912-AAK | ||||||
B21) | 9, 13 | 1ZSC004912-AAT | |||||
11, 15-19, 21-23, 25-27, 29-31, 33-35 | 1ZSC004912-AAU | ||||||
E, T | >800-1000 |
9, 13 | - | 1ZSC004912-ABA | |||
11, 15-19, 21-23, 25-27, 29-31, 33-35 | - | 1ZSC004912-AAY | |||||
>1000-1800 | 9, 13 | - | 1ZSC004912-ABB | ||||
11, 15-19, 21-23, 25-27, 29-31, 33-35 | - | 1ZSC004912-AAZ | |||||
1) B1 (1 phase) and B2 (2 phases) are combined components, forming the "B-group". |
Insulating level (kV) | Selector | Switching type | Connection | Max. rated through-current (A) | Number of positions | Available versions | Drawing number |
380 650 750 1050 |
F | L | N | 450-800 | 5-18 | 700 A: long 800 A: long For .N and .B |
1ZSC026120-AAA |
B11) | 1ZSC026120-AAB | ||||||
B21) | 1ZSC026120-AAD | ||||||
E, T | 0-1800 | - | 1ZSC026120-AAB | ||||
R, D | N | 450-800 | 8-9, 12-13 | 700 A: long 800 A: long For .N and .B |
1ZSC026120-AAE | ||
10-11, 14-35 | 1ZSC026120-AAF | ||||||
B11) | 8-9, 12-13 | 1ZSC026120-AAG | |||||
10-11, 14-35 | 1ZSC026120-AAH | ||||||
E, T | 0-1800 | 8-9, 12-13 | 1ZSC026120-AAG | ||||
10-11, 14-35 | 1ZSC026120-AAH | ||||||
B21) | 450-800 | 8-9, 12-13 | 1ZSC026120-AAL | ||||
10-11, 14-35 | 1ZSC026120-AAM | ||||||
1) B1 (1 phase) and B2 (2 phases) are combined components, forming the "B-group". |
The drawing shows | Drawing number |
---|---|
Mounting on active part | 5492 0103-1 |
Accessories placement: Standard top section without oil filter unit | 5492 0103-2 |
Accessories placement: Top section for oil filter unit | 5492 0103-3 |
Accessories placement: Top section with temperature switch | 5492 0103-5 |
Accessories placement: Top section with two valves R1" |
5492 0103-4 |
Accessories placement: Top section with two valves R1" and oil filter unit | 5492 0103-7 |
Drain valve | 5492 0083-10 |
Pressure relief device - flow diameter 130 mm - Qualitrol | 5492 0083-15 |
Pressure relief device - flow diameter 50 mm, standard - Comem | 1ZSC003721-AAW |
Pressure relief device - flow diameter 50 mm, class C5M-H - Comem | 1ZSC003721-AAV |
Bevel gear (on top section, T-shape) | 5492 0083-19 |
Bevel gear (on top section, L-shape) | 1ZSC004021-AAD |
Bevel gear (in external drive shaft system) | 5492 0083-1 |
Support for bevel gear (on external drive shaft system) | 5492 999-11 |
Pressure relay | 5492 0083-2 |
Oil flow relay | 1ZSC003527-ABB |
External drive shaft system | 5492 0083-4 |
Temperature relay | 1ZSC003716-AAM |
Temperature sensor | 1ZSC005333-AAF |
Temperature sensor and pressure relay | 5492 0083-33 |
Thermo switch housing | 5492 0083-22 |
Number of positions | Max. number of turns | Min. number of turns |
---|---|---|
5 | 5492 0373-1 | 5492 0376-1 |
6 | 5492 0373-2 | 5492 0376-2 |
7 | 5492 0373-3 | 5492 0376-3 |
8 | 5492 0373-4 | 5492 0376-4 |
9 | 5492 0373-5 | 5492 0376-5 |
10 | 5492 0373-6 | 5492 0376-6 |
11 | 5492 0373-7 | 5492 0376-7 |
12 | 5492 0373-8 | 5492 0376-8 |
13 | 5492 0373-9 | 5492 0376-9 |
14 | 5492 0373-10 | 5492 0376-10 |
15 | 5492 0373-11 | 5492 0376-11 |
16 | 5492 0373-12 | 5492 0376-12 |
17 | 5492 0373-13 | 5492 0376-13 |
18 | 5492 0373-14 | 5492 0376-14 |
Number of positions |
Max. number of turns |
Min. number of turns |
9 |
||
11 |
||
13 |
||
15 |
||
17 |
||
19 |
||
21 |
||
23 |
||
25 |
||
27 |
||
29 |
||
31 |
||
33 |
||
35 |
Number of positions |
Max. number of turns |
Min. number of turns |
9 |
||
11 |
||
13 |
||
15 |
||
17 |
||
19 |
||
21 |
||
23 |
||
25 |
||
27 |
||
29 |
||
31 |
||
33 |
||
35 |
Number of positions |
Max. number of turns |
Min. number of turns |
5 |
||
6 |
||
7 |
||
8 |
||
9 |
||
10 |
||
11 |
||
12 |
||
13 |
||
14 |
||
15 |
||
16 |
||
17 |
||
18 |
||
19 |
||
20 |
||
21 |
||
22 |
Number of positions |
Max. number of turns |
Min. number of turns |
9 |
||
11 |
||
13 |
||
15 |
||
17 |
||
19 |
||
21 |
||
23 |
||
25 |
||
27 |
||
29 |
||
31 |
||
33 |
||
35 |
Number of positions |
Max. number of turns |
Min. number of turns |
9 |
||
11 |
||
13 |
||
15 |
||
17 |
||
19 |
||
21 |
||
23 |
||
25 |
||
27 |
||
29 |
||
31 |
||
33 |
||
35 |
Number of positions |
Max. number of turns |
Min. number of turns |
5 |
||
6 |
||
7 |
||
8 |
||
9 |
||
10 |
||
11 |
||
12 |
||
13 |
||
14 |
||
15 |
||
16 |
||
17 |
||
18 |
Number of positions |
Max. number of turns |
Min. number of turns |
9 |
||
11 |
||
13 |
||
15 |
||
17 |
||
19 |
||
21 |
||
23 |
||
25 |
||
27 |
||
29 |
||
31 |
||
33 |
||
35 |
Number of positions |
Max. number of turns |
Min. number of turns |
9 |
||
11 |
||
13 |
||
15 |
||
17 |
||
19 |
||
21 |
||
23 |
||
25 |
||
27 |
||
29 |
||
31 |
||
33 |
||
35 |
Movie title | ID |
---|---|
Tap-changers by ABB: Based on traditions - geared for change | 1ZSC000717-AAM |
Vacuum - a logical progression: Advantages of the VUCG on-load tap-changer | 1ZSC000717-AAT |
Life cycle support: Training centers | 1ZSC000717-ABD |
Vacuum - a logical progression: Upgrading made as easy as 1 - 2 - 3 | 1ZSC000717-ABE |
Synthetic test circuit: The value of experience | 1ZSC000717-ABX |
It's all about commitment: Life cycle support | 1ZSC000717-ACX |
Related Offerings
Contact us
Submit your enquiry and we will contact you