EDS500 series
Connectivity, guaranteed.
The EDS500 product family of rugged Ethernet/SHDSL managed switches and FSK-based analog modems has been specifically designed for critical infrastructure and industrial applications with enhanced, robust communication technology that ensures minimal downtime and enables predictive failure notification and encrypted management.
Depending on the model, data communication features two-wire copper lines, starting at very low baud rates (FSK-based analog modems) or SHDSL/EFM connections with up to 15 Mbps data rate, and ranges up to Ethernet (copper and optical). SFP slots and suitable SFP modules provide connectivity over optical multimode or single mode fibers up to 80 km, both for Duplex LC (two fibers) and Simplex LC (bi-directional over one fiber). Several models provide Power-over-Ethernet ports (IEEE 802.3at / PoE+ and above).
The EDS500 managed switches for optical and copper Ethernet are certified for IEC 61850. The Ethernet/SHDSL switches support a variety of useful, reliable and intelligent functions, such as MSTP/RSTP/STP (IEEE 802.1Q/w/D), VLAN, IEEE 802.1X, HTTPS, SNMPv3, SSH, QoS, rate limiting, ACL/packet filter, RMON, LLDP, L2TP, IGMP snooping, ITU-T G.8032 ERPS ,and many more, making EDS500 suitable for any harsh industrial environment.
Benefits
High level benefits of Hitachi Energy's EDS500 series devices include the capacity to handle mixed copper and fiber optic infrastructure with the same device(s), features, look and feel. Connecting copper (SHDSL) and fiber optics infrastructure with the same device provides a seamless transition from copper to fiber optics.
Hitachi Energy EDS500 series devices provide predictive failure notification that detects, monitors and analyzes network conditions that may result in severe errors and/or malfunctions, and notifies users before conditions become critical. Predictive failure notification helps to convert unplanned downtime into plannable maintenance, reduces maintenance and service outage costs and improves asset health.
Hitachi Energy EDS500 series devices process modern SCADA protocols. They can convert legacy IEC-101 SCADA protocol into IEC-104, to achieve higher data rates, and use modern communication technologies for high-availability and redundancy, monitoring the communication device via SCADA protocol (through the SCADA control center).
Hitachi Energy EDS500 series devices support web-based approaches, command line interface, SNMP and Syslog as well as human-readable configuration files that can be easily adapted. A memory stick is able to transfer, backup and restore configurations to ensure a simpler and faster management and configuration process.
Hitachi Energy EDS500 series legacy serial communication interface and behavior support gives customers a modern Ethernet-based network and communication function using existing low-quality cables, and is able to upgrade communication technology in an installation/substation without changing the end device, e.g. RTU and/or its configuration.
Our offering
- Ethernet communication products
- Serial communication products
The EDS500 managed Gigabit Ethernet switches distribute Ethernet with support of redundant topologies. Copper as well as fiber optical media are supported for WAN connections. Available copper lines can be reused for TCP/IP communication, allowing for an independent network for private communication. Additionally, transmission of serial data via RS-232 or PDH data via G.703 E1 interfaces allow for an easy migration from legacy technology to Ethernet communication.
Flexibility and reliability of communication is a precondition for modern SCADA systems. The EDS500 series guarantees an error-free and comprehensive communication to a variety of devices.
500NMD series
| Device | Ethernet | Optical (SFP) | SHDSL | Serial |
|---|---|---|---|---|
| 500NMD50 | 4 | - | - | 1 |
| 500NMD51 | 4 | - | 1 | 1 |
| 500NMD02 | 4 | - | 2 | 2 |
| 500NMD62 | 4 | (up to) 2 | - | 2 |
| 500NMD63 | 4 | (up to) 2 | 1 | 2 |
| 500NMD64 | 4 | (up to) 4 | - | 2 |
| 500NMD65 | 4 | (up to) 4 | 1 | 2 |
500NMD50 switch
DIN-rail managed Gigabit Ethernet switch suitable for redundant topologies equipped with:
- Power supply 24 … 60 V DC
- 4 x 10/100/1000 Ethernet IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab (10Base-T / 100Base-TX / 1000Base-T)
- 1 x RS-232 suitable for serial protocols
- 1 x alarm relay isolated changeover contact
- Option for IEEE 802.3at PoE+
500NMD51 switch
DIN-rail managed Gigabit Ethernet switch suitable for redundant topologies equipped with:
- Power supply 24 … 60 V DC
- 1 x SDSL / SHDSL (ETSI TS 101 524/ ITU-T G.991.2) for usage with single copper pair
- 4 x 10/100/1000 Ethernet IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab (10Base-T / 100Base-TX / 1000Base-T)
- 1 x RS-232 suitable for serial protocols
- 1 x alarm relay isolated changeover contact
- Option for IEEE 802.3at PoE+
500NMD02 switch
DIN-rail managed Ethernet switch suitable for redundant topologies equipped with:
- Power supply 24 … 60 V DC
- 2 x SDSL / SHDSL (ETSI TS 101 524/ ITU-T G.991.2) for usage with single copper pair
- 4 x 10/100 Ethernet IEEE 802.3 / IEEE 802.3u (10Base-T / 100Base-TX)
- 2 x RS-232 suitable for serial protocols
- 1 x alarm relay isolated changeover contact
- Option for IEEE 802.3at PoE+
500NMD62 switch
DIN-rail managed Gigabit Ethernet switch suitable for redundant topologies equipped with:
- Dual redundant power supply 24 … 60 V DC
- 4 x 10/100/1000 Ethernet IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab (10Base-T / 100Base-TX / 1000Base-T)
- 2 x SFP, additional SFP module is required (see 500SSMxx / 500SDMxx / 500SUMxx / 500SMMxx)
- 2 x RS-232 suitable for serial protocols
- 1 x alarm relay isolated changeover contact
- Option for IEEE 802.3at PoE+
500NMD63 switch
DIN-rail managed Gigabit Ethernet switch suitable for redundant topologies equipped with:
- Dual redundant power supply 24 … 60 V DC
- 1 x SDSL / SHDSL (ETSI TS 101 524/ ITU-T G.991.2) for usage with single copper pair
- 4 x 10/100/1000 Ethernet IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab (10Base-T / 100Base-TX / 1000Base-T)
- 2 x SFP, additional SFP module is required (see 500SSMxx / 500SDMxx / 500SUMxx / 500SMMxx)
- 2 x RS-232 suitable for serial protocols
- 1 x alarm relay isolated changeover contact (pluggable screw-connector)
- Option for IEEE 802.3at PoE+
500NMD64 switch
DIN-rail managed Gigabit Ethernet switch suitable for redundant topologies equipped with:
- Dual redundant power supply 24 … 60 V DC
- 4 x 10/100/1000 Ethernet IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab (10Base-T / 100Base-TX / 1000Base-T)
- 4 x SFP, additional SFP module is required (see 500SSMxx / 500SDMxx / 500SUMxx / 500SMMxx)
- 2 x RS-232 suitable for serial protocols
- 1 x alarm relay isolated changeover contact
- Option for IEEE 802.3at PoE+
500NMD65 switch
DIN-rail managed Gigabit Ethernet switch suitable for redundant topologies equipped with:
- Dual redundant power supply 24 … 60 V DC
- 1 x SDSL / SHDSL (ETSI TS 101 524/ ITU-T G.991.2) for usage with single copper pair
- 4 x 10/100/1000 Ethernet IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab (10Base-T / 100Base-TX / 1000Base-T)
- 4 x SFP, additional SFP module is required (see 500SSMxx / 500SDMxx / 500SUMxx / 500SMMxx)
- 2 x RS-232 suitable for serial protocols
- 1 x alarm relay isolated changeover contact (pluggable screw-connector)
- Option for IEEE 802.3at PoE+
Contact us
Submit your enquiry and we will contact you
Downloads
- Ethernet communication downloads
- Serial communication downloads
